1.Add

Add new Charge Zones following the steps shown below. (Note: for better understanding, this page will be reffered to as the first-level charge zone.)

To mannually add charge zone, fill in the Charge Zone name (description is optional), and click 'Save'.

To add multiple charge zones at a time, fill in the first-level Charge Zone name, download the template file, complete the file, then upload.

Note: Uploading is not supported for existing first-level charge zones, only new first-level charge zones support template uploading.

Image Added

2.Edit

After a new first-level charge zone has been added, click 'Edit' in the Operation section to enter the Zone Detail page.

The Zone Detail page consists of three parts, as shown below:

1. Edit the first-level charge zone name & description, click 'Save' after changes;
2. Secondary-level charge zone;
3. Rules of each secondary-level charge zone;

Image Added

To add or edit a secondary charge zone, click 'Add' or 'Edit', as shown below:

Image Added

To add or edit a charge zone rule, click 'Add' or 'Edit', as shown below:

Image Added

Note: When entering the Zone Detail page, rules under the top secondary-level charge zone will be displayed as a default setting, the secondary-level charge zone name will be displayed at the upper-right corner of the rules list, as shown below:

Image Added

3.Delete

To delete any first-level charge zones, select the data you wish to delete (multi-select supported), then click 'Delete', as shown below:

Note: First-level charge zones that have been used cannot be deleted.

Image Added

To delete any secondary-level charge zones, select the data you wish to delete (multi-selection supported), then click 'Delete'.

Note:  While deleting secondary-level charge zones that have been used, a second confirmation message will pop-up to remind you that this charge zone has been used, as shown below. If choose to continue deleting, data containing any pages relating to this zone will be cleared. For example, if any last mile rate card is in use, after deleting the secondary charge zone, the corresponding section in the last mile rate card will be deleted.

Image Added

To delete any particular rules, select the data you wish to delete (multi-selection supported), then click 'Delete', as shown below.

Note: Rules can be deleted whether used or not, there will be no second confirmation.

Image Added

4.Export

Select the first-level charge zones you wish to export (multi-selection supported), then click 'Export Detail', as shown below.

Note: Multiple first-level charge zones can be distinguished under the Charge Zone column in the exported excel file. 

Image Added

5. Rules Setting Notes

5.1. Departure fields are currently unavailable, any setting will not take affect at the moment, as shown below.

5.2. Destination Matching Method is set default as Match Complete; Destination Zip Code is mandatory field.

5.3. Fields other than "Destination Matching Method" are not mandatory, but at least one should be filled in to save the rule. Any fields that are filled will take effect. Empty fields will not take effect.

5.4. Zip code setting:

发出邮编类型：完整邮编、截取开头；默认完整邮编（字段长度最大64）

目的邮编：格式有4种，单个邮编、枚举、范围、枚举和范围组合

单个邮编：如：111A            只输入一个邮编，需符合此邮编

枚举：如111A,2222,3333        多个邮编用英文逗号分隔，符合任意一个邮编即可

范围：如1111-9999             范围型只支持纯数字且前小后大相同位数

枚举和范围组合：如111A、2222-9999

完整邮编：用订单的完整邮编和设置的邮编字段匹配

截取开头：用订单的邮编开头和设置的邮编字段匹配，截取几位看设置几位

Image Added

5.5目的国家：费用分区可设置国家、价卡(海外仓)可设置国家，如下图：

情况1：都没设置国家，则不用对比国家

情况2：只有价卡中设置国家，订单收件国家需要和价卡中国家一样

情况3：只有费用分区中设置国家，订单收件国家需要和费用分区中国家一样

情况4：价卡和费用分区都设置国家，三者国家都要一致

5.6如遇到订单数据和多个分区设置的都符合，任一取一个分区